Lamp hours used, Computer resolution, Mute status | Kodak DP2000

Lamp hours used

User’s Guide KODAK DP2000 Digital Projector

Lamp hours used

Indicates how many hours the current lamp has been in use. The counter starts at zero hours and counts each hour the lamp is in use. Change the bulb when the brightness is no longer acceptable. See “Replacing the Projection Lamp” on page 38 for details.

Computer resolution

Shows your computer’s resolution setting. To change this, go to your computer’s Control Panel and adjust the resolution in the Display tab. See your computer user’s guide for details.

Horizontal refresh rate

The time period that one horizontal line is displayed.

Vertical refresh rate

The time period that one video frame is displayed.

Mute status

Indicates if the audio is muted.

Software version

Indicates the projector’s software version. This information is useful when contacting Technical Support.

Source

Indicates the active source, Computer or Video.

34

Image 40

Kodak DP2000 Lamp hours used, Computer resolution, Horizontal refresh rate, Vertical refresh rate, Mute status, Source

Contents

with KODAK Image Manager Software User’s Guide KODAK DP2000 Digital ProjectorPage Safety Certifications FCC WarningCanada EN 55022 WarningPage Table of Contents Safety InstructionsSetting up the Projector Using the Projector Appendix A Appendix BAppendix C Appendix D Safety Definitions Safety InstructionsSafety Symbols Safety Terms Important Operating Considerations Battery Use Page Introduction Image ResolutionCompatibility User’s Guide , Quick Start Guide Unpacking the Projectorand Online User Guide CD Projector Features Usage Guidelines If You Need Assistance Online ServicesFaxed Information Customer Support Warranty Setting up the Projector Positioning the Projector Connecting the Projector Connecting to a Computer To connect to a computer Do you want to play your computer’s audio on the projector? If your computer has a PS/2 connector, use the PS/2 mouse cable Connecting to a Video Player To connect to a video player 4. Plug the other end of the audio adapter into the audio cable Starting the Projector Turning Off the Projector Using the Projector Basic Image Adjustment Adjusting the Projector The Remote Control Using the Projectordisk mouse simulates the right mouse button simulates the left mouse button Press anywhere on the edge of the disk mouse to move the cursor on the screen. You can move the cursor at any angle by pressing the corresponding edge of the disk. The mouse button on the top of the remote simulates your computer’s right mouse button the button on the bottom simulates your computer’s left mouse button. See “Using the Keypad and Remote Control” starting on page 23 for a description of the four function buttons The Remote Control Buttons Using the Keypad and Remote ControlThe Keypad Buttons Volume keypad only Lamp on/off keypad onlyMenu or Computer and Video Using the On-Screen Menus KHQWKHPHQXRSWLRQLVDFWLYH XVHWKHVHEXWWRQVWRQDYLJDWH WKURXJKWKHPHQXV Brightness Display MenuContrast Audio Menu Reset AllVolume Tint Auto Image Image MenuAuto Resize Manual Tracking Manual SyncHorizontal position Vertical position Controls MenuVideo Standard Default Source Standby TimeRear Projection Auto Source Select Display Messages Plug and PlayDisplay Startup Screen Language Menu Status Menu Computer resolution Lamp hours usedHorizontal refresh rate Vertical refresh rate Kodak Menu Image Manager Settings The new contrast setting is immediately applied to the image Using the Image Manager1. Click the Kodak menu Maintenance Troubleshooting Cleaning the Lens Replacing the Projection Lamp SURMHFWRUWRRYHUKHDW Be careful when removing the lamp module so that it does not break Maintenance & Troubleshooting5. Loosen the two non-removable screws on the outside of the module 6. Grasp the pull tab and lift out the lamp module 9. Tighten the screws on the outside of the module 3OXJLQWKHSRZHUFRUGWRWXUQWKHSURMHFWRUEDFNRQ5HSODFHWKHODPSGRRUE\LQVHUWLQJWKHKRRNVRQWKHUHDURIWKH 7RUHVHWWKHODPSKRXUFRXQWHULQWKH6WDWXVZLQGRZSUHVVDQG Replacing the Batteries in the Remote Control Using the Kensington Lock Troubleshooting Problem Nothing on projection screenProblem Color or text not being projected Problem The screen resolution is not right Problem Image is too wide or narrow for screen Problem Only the start-up screen displaysProblem Image is out of focus Problem Image and menus are reversed left to right Problem the projector displays vertical lines, “bleeding” or spotsProblem no sound Problem Image is “noisy” or streaked Problem Lamp seems to be getting dimmer Problem Lamp shuts offPage Specifications DimensionsWeight Appendix A Input Power Requirements OpticsLamp Audio Input Portable and Laptop Activation Chart Key commandAppendix B Computer Key command Key commandComputer de-activate Key command Key commandComputer de-activate Key command Key commandComputer de-activate Key command Key commandComputer de-activate Key command Key commandComputer de-activate Key command Key commandComputer de-activate Key command Key commandComputer de-activate Key command Key commandComputer de-activatePage Using Video Mirroring with a PowerBook Computer Appendix C Using SimulScan Appendix D Projected Image Size Image Size, Width and Height for DP2000-maximum image size Image Size, Width and Height for DP2000-minimum image size Index H help L lampPage Page WARRANTY TIME PERIOD WARRANTY REPAIR COVERAGELIMITATIONS APPLICATION SUPPORT HOW TO OBTAIN SERVICE Page Eastman Kodak Company 343 State Street Rochester, New York Kodak is a trademark of Eastman Kodak CompanyPN 3H7969 9/99