Maintenance & Troubleshooting
Replacing the Batteries in the Remote Control
The life of the batteries depends on how often and how long you use the remote control. Symptoms of low battery charge include erratic responses when using the remote control and a reduced range of operation.
Follow these steps to replace the batteries:
1.Turn the remote control face down in your hand.
2.Slide the battery cover off the end of the remote control.
3.Remove the old batteries and properly dispose of them.
4.Install two new AAA alkaline batteries. Make sure you install each battery in the correct direction.
5.Slide the battery cover back on the remote control.
Using the Kensington Lock
The projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security System. Refer to the information that came with the Kensington System for instructions on how to use it to secure the projector.
DLP
Includes
Manager
Image
41
