Using the Projector
Manual Sync
Note: The Manual Sync option is available only for computer sources. The projector sets this option automatically for a video source.
The projector adjusts signal synchronization automatically for most computers. But if the projected computer image looks fuzzy or streaked, try turning Auto Image off then back on again. If the image still looks bad, try adjusting the signal synchronization manually:
1.Turn Auto Image off.
2.Highlight Manual sync, then press the left or right navigation button repeatedly until the image is sharp and free of streaks.
Manual Tracking
The projector adjusts tracking automatically to match the video signal from your computer. However, if the display shows evenly spaced, fuzzy, vertical lines or if the projected image is too wide or too narrow for the screen, try turning Auto Image off then back on again. If the image is still bad, try adjusting the tracking manually:
Note: Manual Tracking option is available only for computer sources. The projector sets this option automatically for a video source.
1.Turn Auto Image off.
2.Highlight Manual tracking, then press the left or right navigation button repeatedly until the fuzzy vertical bars are gone.
Horizontal position
Note: The Horiz. Position option is available only for computer sources. The projector sets this option automatically for a video source.
Follow these steps to manually adjust the horizontal position:
1.Turn Auto Image off.
2.Highlight Horizontal position, then press the left navigator button to move the image right or press the right navigator button to move the image left.
Positioning adjustments are saved when you unplug the projector.
29