Kodak DP2000 manual Connecting to a Video Player, To connect to a video player

Setting up the Projector

Connecting to a Video Player

If your video player uses a round, one-prong composite video connector, you’ll only need the audio cable, audio adapter, and composite video cable that shipped with the projector.

If your video player uses a round, four-prong S-video connector, you’ll need an S-video cable in addition to the audio cable and audio adapter. The S-video cable is sold separately.

Note: Your video player may have a "Video Out" connector for a coaxial cable connection. Do not use this to connect to the projector.

To connect to a video player:

1.Plug the composite video cable yellow connector into the “video-out” connector on your video player. This connector may be labeled “To Monitor.”

•If you’re using an S-video cable, connect it to the “S-video out” connector on the video player.

2.Plug the other yellow connector into the composite video

connector

on the back of the projector.

•If you’re using S-video, plug the other end of the cable into

the “S-video” connector on the projector.

Connecting with composite video cable

audio adaptor

composite video cable

audio cable

15