MS4200 EN 2/3/04 9:54 AM Page 12
Settings
EN Showing Demonstration
Press DEMO to turn on/off demonstration mode. The demonstration scrolls through all display operations.
Setting the Clock
1.Press and hold CLOCK until the hour flashes on the display.
2.Press PRESET - 
or PRESET + 
to set the hour and then press CLOCK to shift to minute digits.
3.Press PRESET - 
or PRESET + 
to set the minute.
4.Press PROG/SET to save settings and STOP 
to quit setting.
Note:
When system is ON, you can press CLOCK to display the current time for about 2 seconds.
Setting the Timer
1.Press and hold TIMER until the ON and clock hour flashes on the display ( ON - timer on time ).
2.For setting time, press PRESET - 
or
PRESET + 
on the main unit or PRESET
FOLDER 
or 
on the remote control to set the hour and then press TIMER to shift to minute digits.
7
3.Press PRESET - 
or PRESET + 
on the
main unit or PRESET FOLDER 
or 
on the remote control to set the minute.
4.Press TIMER to change to OF (timer off time) with clock time flashing. Repeat steps 2 & 3 for timer off time setting.
5.Press TIMER to select source. Press PRESET -
| or PRESET + |
| on the main unit or | |
|
| |||
|
| |||
PRESET FOLDER | or | on the remote | ||
control to select between CD / TUNER /
TAPE / REC TU.
If REC TU is selected, select the preset station
by pressing PRESET - |
| or PRESET + |
| on | |
the main unit or PRESET FOLDER | or |
|
| ||
on the remote control. |
|
|
|
| |
6.Press TIMER to set volume. Adjust VOLUME control to select desired volume level.
7.Press PROG/SET to save settings.
Press STOP 
to quit setting.
The timer is automatically activated once timer setting is saved.
Activating the Timer
Press and release TIMER to turn on/off the timer.
The timer icon 
is displayed when timer is activated.
