MS4200 EN 2/3/04 9:54 AM Page 17
CD Player
Setting Up a CD Program
Tips:
You can create a program of up to 32 tracks.
1.While the CD player is stopped, press PROG/SET to enter program mode. The system displays the next available program number
2.Press the corresponding disc number on the main unit or DISC SKIP on the remote control to select disc. Refer to the Disc Number display to see the disc that is selected.
3.Press SKIP BACKWARD 
/ SKIP
FORWARD 
on the main unit or 
or 
on the remote control to select track to enter into memory.
4.Press PROG/SET to save your settings.
5.Repeat steps 2 to 4 to store more tracks into program memory.
Note:
Only the first 99 tracks from each disc can be programmed.
Playing a Program List | EN |
While in PROGRAM mode , press PLAY/PAUSE 
.
If you are not currently in program mode, press PROG/SET to enter program mode before
pressing PLAY/PAUSE 
.
Display Program List
1.While the CD player is stopped, press PROG/SET to enter PROGRAM mode.
2.Press PROG/SET repeatedly to view each track assignment in the program list.
Edit Program List
1.Follow “Display Program List” steps until the location to be edited is displayed.
2.Repeat steps 2 to 4 under “Setting Up a CD Program “ to edit the track to store into memory.
Clear Program Location
Press PROG/SET repeatedly until the program location to be cleared is displayed. Press and hold STOP 
to clear.
12
