Technicolor - Thomson Network Router manual Your PC Installing a TCP/IP Stack

Chapter 1: Connections and Setup

Your PC: Installing a TCP/IP Stack

Follow these instructions to install the TCP/IP protocol stack on one of your PCs only after a network card has been successfully installed inside the PC. These instructions are for Windows Me. For TCP/IP setup under Windows NT, 2000, and XP, refer to your Windows documentation.

1.Click the Start button. Choose Settings and then Control Panel.

2.Double-click on the Network icon to bring up your Network window. Select the Configuration tab.

3.Click the Add button.

4.Double-click on Protocol.

Fig. 2

5.Highlight Microsoft under the list of manufacturers.

6.Find and double-click TCP/IP in the list to the right (see Figure 3).

Fig. 3

10 Chapter 1