Technicolor - Thomson RC5920P manual Jacks on the Back of the DVD Player

Connections & Setup

The Jacks on the Back of the DVD Player

When connecting, make sure you connect Output jacks to Input jacks, Video to Video, Right Audio to Right Audio, etc.

COMPONENT

VIDEO OUT

Pr	VIDEO	AUDIO	COAXIAL OPTICAL
	OUT	OUT
	VIDEO
Pb		L
Y		R
	S-VIDEO

Component	Video	S-Video	Audio	Digital
Video Out	Out	Out	Out	Audio Out

Description of Jacks (from left to right)

COMPONENT (Y, PB, PR) VIDEO OUT

Use these jacks to connect to a TV with component video input jacks. Unlike a single video input, component video maintains the video signal as three separate signals through these three jacks. This connection provides optimum quality. To ensure maximum picture quality, use three video-grade cables for the Y, PB, and PR connections. Note that it is essential to match the color-coded connectors with a compatible TV.

VIDEO OUT

If you are using color-coded red, yellow and white RCA cables, connect the yellow video cable to this jack and to the Video Input jack on your TV.

S-VIDEO OUT

If your TV has an S-Video jack, you can connect an S-Video cable for increased video quality. The S-Video cable only carries the picture signal; remember to connect the left and right audio cables.

AUDIO OUT

Insert audio cables (left and right) from the FRONT R (right) and L (left) jacks on your DVD player to the corresponding Audio Input jacks (left and right) on your TV or receiver.

DIGITAL AUDIO OUT

Use a digital optical or coaxial cable (not provided) to connect your DVD player to a compatible Dolby Digital or DTS receiver or decoder.

18 Chapter 1