Operating the Alarm
EN |
Setting the WAKE Time
Your digital clock operates on a 24 hour standard mechanism.
1.Press the SET button until ALARM 1 / ALARM 2 icon is blinking.
2.Press REV 
or FWD 
to set the wake time. The time decrements or increments will follow by a faster rate when you press and hold either REV 
or FWD 
.
3.After the ALARM time is set, press SET repeatedly until no icon is blinking.
Tip:
The unit equips with
WAKE feature, the alarm tone volume will increase gradually to its maximum in about 30 to 45
seconds.
Tip:
If you set the SLEEP function
with low volume level before going to bed, we advise using ALARM 
mode to wake you up since its
volume will automatically increase.
Waking by Selected Source
You may be woken up by ALARM 
, RA- DIO 
or CD 
.
1.Select an MW or FM station.
2.Set wake time (see above directions).
3.Press ALARM 2 or ALARM 1 to select
waking up by ALARM 
, RADIO 
or CD 
. Corresponding indicator will be up next to the selected setting.
4. Adjust the volume by turning VOLUME.
You can select your CD wake track by the following procedures.
1.Press WAKE UP CD TRACK.
2.While pressing, press REV 
or FWD 
to select your desired CD wake up track.
Note:
When you turn off the alarm by pressing OFF, the alarm will turn on at the same time tomorrow.
7
