The screen that appears shows the various optional settings for the output queue. Note that the
top of the screen shows the command you entered so you can be sure you are on the correct
screen.
Note that also on the bottom of the screen, the status line shows that on this screen, the
parameter OUTQ is a required entry for this command to execute. Enter the name of the
desired output queue. The default entry for Library is ‘*CURLIB’. This indicates in which library
the OUTQ will be created and usually isn’t changed unless the system administrator deems it
necessary. For this example, our OUTQ is to be called ‘DP6010’. Upon entering the name,
press the <TAB> key to proceed down to the ‘Remote system’ field.
- 6 -