Adjustments while using the unit
Pitch control
Fine adjustment to the number of revolutions per minute.
1Press [reset] to turn off the green LED light.
Green
LED indicator
Pitch control
reset
Adjusting the turntable brake speed
Brake speed can be adjusted by pressing
Use a small screwdriver in the hole on the turntable to adjust the brake speed.
S:Slow stop
F:Fast stop
S
B R A K E
F
2Slide [pitch adj.] while the turntable is
revolving.
Move the control to the required position.
•The numbers represent approximate percentages.
•Pitch can be adjusted between
To reset pitch to the preset value
Press [reset].
The green LED indicator lights and the pitch immediately returns to the set value (33 1/3 or 45 r/min), regardless of any adjustments made with [pitch adj.].
Press [reset] again and pitch returns to the adjusted value.
To measure pitch
The four rows of strobe mirrors around the edge of the turntable can assist you in measuring pitch.
+6.4 % change in pitch when stationary
+3.3 % change in pitch when stationary Normal turntable speed when stationary _3.3 % change in pitch when stationary
They are lit by the strobo light as they pass and each row appears to stand still at a different pitch.
off
on
Strobo light
p
o
wer
Read the pitch control slider replacement instructions that comes with this product carefully when replacing the pitch control slider.
9
RQT7018
