Technika 42-502 manual Connections, Connecting A Tv Antenna / Cable / Satellite, Common Interface

CONNECTIONS

CONNECTING A TV ANTENNA / CABLE / SATELLITE

To view television channels correctly, a signal must be received from one of the following sources:

-An indoor or outdoor antenna

-A cable system

-A satellite system

Note:

For receiving over-the-air TV broadcasts, we recommend that you use an external fixed antenna. Should you require the use of a temporary antenna, please ensure that you purchase an antenna with sufficient ability to receive in weak signal areas. Only when you are in close proximity to a transmitter will a temporary antenna reproduce a signal as strongly as a fixed antenna.

Satellite, cable or TV antenna cable to TV ANTENNA terminal (cable not included)

COMMON INTERFACE

The unit is equipped with a CI slot. The CI slot allows you to insert a CAM (Conditional Access Module) with an appropriate subscription card for some pay for view services.

It is required to subscribe to a pay channel company to view the pay channels of the Digital Terrestrial broadcasting.

Fully insert the CAM (Conditional Access Module) into the CI (Common Interface) slot on the bottom of the unit with its label side facing you.

Important notes:

•Switch off the TV and unplug from the AC power mains before inserting or removing the CAM.

•The CAM should be correctly inserted, it is impossible to insert fully if reversed.The CAM or theTV terminal may be damaged if the CAM is forcefully inserted.

•Some CAMs may require setting up. Refer to the module instruction manual for details of the settings.

E-9