USING THE ALARM

IMPORTANT NOTES:

Remember to set the unit to Standby and set a high enough volume to wake you before going to bed.

If you have chosen FM radio as wake-up mode, remember to tune to a station before going to bed.

If you have chosen SD Card or USB as wake-up mode, remember to dock a card/drive before going to bed. If you forget to dock a card/drive and the alarm is set, the unit will automatically wake you with a buzzer.

WHEN THE ALARM WAKES YOU

The alarm will sound at your preset time and the Alarm Mode display will flash. You can then choose to set snooze, which will temporarily reset the alarm for a further 9 minutes, or to switch it off.

To set snooze:

To set snooze, press the SNOOZE/SLEEP button when the alarm sounds.

The alarm will stop sounding and the alarm mode indicator will flash. After 9 minutes, the alarm will sound again.

To switch off the alarm:

To switch off the alarm, press the POWER/FUNC. button.

The unit will set to Standby.

ALARM REPEAT

The alarm will sound at the same time each day unless the alarm mode is set to Alarm Off.

POWER FAILURE

In the event of a power failure when the unit is operating from mains power, all alarm settings will be lost unless a set of batteries have been fitted.

BATTERY POWER

If the unit is battery powered and you are setting the alarm to wake you, check for the battery warning symbol to ensure there is adequate battery life remaining before going to bed.

11