Before docking your iPod you must first check if your iPod has a docking connector. Early iPod models and iPod shuffle do not have one and cannot be docked to your unit. The docking connector is located on the base of the iPod as shown below.
Docking ConnectorBefore docking your iPod, you must first fit the correct iPod adaptor to the docking bay. Each iPod adaptor matches the shape of a particular iPod and is necessary to ensure that your iPod is securely held when docked.
iPod adaptor
Docking bayFITTING THE iPod ADAPTOR
When your iPod was new it may have been supplied with a standard dock adaptor in the packaging. If so, fit the adaptor by pressing it gently into the Docking Bay as shown above.
NOTE: Do not dock an iPod without fitting the correct adaptor, you may damage the iPod and your unit.
If you don’t have a dock adaptor
If your iPod was not supplied with a standard dock adaptor, or if you have lost the adaptor, you can buy one from Apple
DOCKING YOUR iPod
To dock your iPod:
•Switch off the power.•Check that the correct iPod adaptor is fitted to the docking bay.•Locate the iPod on the Docking Connector and press it gently home.To remove your iPod from the dock:
•Grip the iPod at the sides.•Lift the iPod gently from the dock.CHARGING AN iPodWhen an iPod is docked, the iPod will begin to charge automatically.NOTE:- The iPod will charge at all times that the radio is connected to mains power.
Once an iPod is docked, you can operate your iPod functions from the controls on the clock/radio.
Selecting iPod playback mode:
•Press the FUNCTION button repeatedly to select iPod mode.Playback functions:
•Press the /,/SCAN button to toggle between Play and Pause mode at any time.•Press the } or { button to select the next or previous track on your iPod.iPod menu functions:
When an iPod is docked and playing you can navigate the menus from the control buttons on your radio.
•To move up through the iPod menu, press the MENU/ INFO button.•To scroll up and down options displayed on the iPod menu, press the PRESET/ARROW >or <button.
•To select menu items, press the SELECT button.9