USING THE ALARMS

SETTING THE ALARMS

You can set two completely separate alarm times (ALARM 1 and ALARM 2) and activate either or both of them to wake you with a buzzer, radio, or music from a docked iPod.

Changing Alarm 1 settings:

•Press the AL. SET/OFF A button to display the current settings for Alarm 1.
Alarm 1 wake up mode
Alarm 1 ON/OFF

Alarm 1 time

In this example, Alarm 1 is set to play DAB radio at 08:15.

•If Alarm 1 is switched off, press the PRESET/ARROW > or <button to switch Alarm 1 On.

NOTE: You can only change alarm settings when the alarm is switched on.
•Press the SELECT button.

The current wake-up mode setting will flash on the display.

•Press the PRESET/ARROW > or < button to select the alarm wake-up mode for Alarm 1.

•Press the SELECT button to save this setting.

The current wake-up time will be shown with the hours digits flashing.

•Press the PRESET/ARROW > or < button to set the hours for the alarm wake-up time.

•Press the SELECT button to save this setting.

The minutes digits will now flash.

•Press the PRESET/ARROW > or < button to set the minutes for the alarm wake-up time.

•Press the SELECT button to save this setting.

The alarm setting sequence will close.

Changing Alarm 2 settings:

Follow the above steps, but pressing the AL. SET/OFF B button in place of the AL. SET/OFF A button.

Checking Alarm 1 or 2 settings:

•Press the AL. SET/OFF A (or B) button.

The current settings for ALARM 1 will appear on the display.

•Press the AL. SET/OFF A (or B) button again to return to normal operation.

Switching Alarm 1 or 2 On or Off:

•Press the AL. SET/OFF A (or B) button.

•Press the PRESET/ARROW > or < button to switch

Alarm 1 (or 2) On or Off.
When set, the status of the Alarm(s) selected will be shown on the display.
Alarm 1 set
Alarm 2 set

SETTING THE ALARM TO WAKE YOU

To set the alarm to wake you:

•Check that the Alarm 1 or Alarm 2 symbols are displayed as required. If not, set the Alarm(s) On as described in the previous section.

•If you have set either wake up mode to DAB or FM, check that you have tuned the radio to a station.

•If you have set either wake up mode to ‘iPod’, make sure that your iPod is docked.

•Set the radio to Standby (or set the SLEEP function). The radio will switch off and the time and date will be displayed with the Alarm Symbol(s) when set.

WHEN THE ALARM WAKES YOU

The alarm will wake you at the set times with your choice of wake-up mode. The volume will gradually increase in level until turned off.

To turn off the alarm you can choose to set snooze, which will reset the alarm for a further 9 minutes, or to switch it off.

To set snooze:

•To set snooze, press the SNOOZE button.

The alarm will stop and the snooze time will count down on the display. After 9 minutes the alarm will sound again.

To switch off the alarm:

•To switch off the alarm, press the STANDBY/ON button. The unit will set to Standby.

ALARM REPEAT

Once set, the alarm(s) will sound at the same time(s) each day until turned off.

10