SELECTING A SOURCE

SOUND SOURCES

You can choose to listen to the following sources -
•DAB radio
•FM radio
•iPod (when docked)
•Aux source (when connected via the rear panel AUX jack).

Selecting a source:

•Press the FUNCTION button on the front panel or remote control repeatedly to scroll through the available sources.

LISTENING TO FM RADIO

Your radio can also receive FM band radio stations and display RDS data (where broadcast).

To change to the FM band

•Press the FUNCTION button repeatedly to select FM mode.

To auto-tune to FM stations

•Press the SCAN button to search for the next station in the band.

The radio will search and the tuning frequency will be displayed whilst searching.

When a usable station is detected the radio will stop tuning and play the station. If RDS data is present, the station name and scrolling radio text will be displayed. If RDS data is not present, the tuned frequency will be displayed.

To manually tune to FM stations

•Press the M or N button on the remote control to tune the band in 50kHz steps.

STEREO/MONO RECEPTION

You can set your radio to switch automatically between stereo and mono FM reception (Mono/Stereo mode) or to receive in mono only (Mono Only mode). Setting to Mono Only mode may improve sound quality in areas where a weak aerial signal results in a high level of background noise. FM audio mode selection is made via Audio Setting in the FM menu. Refer to the FM Settings Menu section on page 15 for more details of the FM menu.

STATION PRESETS

DAB and FM presets

Using the remote control, your radio can store up to 10 of your favourite stations as presets on both the DAB and FM bands for quick recall. Direct access number buttons are available for Presets 1 to 6. For this reason you may prefer to store your most-used stations in Presets 1 to 6.

To quick store preset 1 to 6

•Tune to the station you want to store as a preset.
•Press and hold one of the NUMBER buttons.

To recall a preset 1 to 6

•Press one of the NUMBER buttons briefly.

The preset station will be tuned. If the preset selected is empty, then the radio will continue to play the last selected station.

To store any preset 1-10

•Tune to the station you want to store as a preset.

•Press and hold the }/PRESET button.
‘Preset Stored’ will be displayed.

•Press the M or N button repeatedly to find the preset number you want to store.

For each preset number the preset station currently stored will be displayed or ‘Empty’ if none is stored.

•Press the SELECT/ENTER button to confirm if you want to store the station in the displayed preset number.

To recall any preset 1-10

•Press the }/PRESET button briefly.

•Press the M/UP or N/DOWN repeatedly to find the preset number you want to play.

•Press the SELECT button briefly to play the preset.

8