SETTING THE ALARMS

SETTING THE ALARMS

You can set two completely separate alarm times (ALARM 1 and ALARM 2) and activate either or both of them to wake you with a buzzer or radio. You can also pre-set the station preset and volume settings that the alarms will wake you with.

The alarms are set from within the ‘Alarm’ option of the Settings Menu.

NOTE:- You must complete all settings before leaving the menu or your changes won’t be saved.

Setting the Alarm:

•Switch on the radio (Alarm settings cannot be changed when set to Standby).

•Press the MENU button.

‘Autoscan’ will appear on the display.
•Press the O button once to step to the ‘System’ menu option.

•Press the VOLUME/SELECT control.

•Press the P or O button to step to the ‘Alarm’ menu option.

•Press the VOLUME/SELECT control.

‘Alarm 1 Setup’ will appear on the display.

•Press the VOLUME/SELECT control to begin setting Alarm 1 or press the P button before selecting to choose Alarm 2 setup.

Alarm 1 Wizard is now displayed.

The alarm is now set in the sequence shown on this page. NOTE: Press the MENU button at any time to exit alarm setting, leaving the settings unchanged.

To make a change to a setting:

1.

Press the P or O button to scroll through the options

ALARM SETTING SEQUENCE

 

available for a setting (or times when clock setting).

 

 

 

 

2.

When you have finished changing a setting, press the

 

 

 

 

 

 

 

 

 

 

 

 

 

VOLUME/SELECT control to confirm the setting and

 

 

 

 

 

move on to the next setting in the sequence.

 

 

 

 

3.

Repeat the previous two steps to change each setting as

 

 

 

 

 

 

 

 

 

required.

 

 

 

 

*NOTE:- When changing the Alarm radio preset setting,

 

 

 

 

 

 

 

 

choose the ‘Last listened’ option to wake to the last station

 

 

 

 

you played before setting the radio to Standby.

 

 

 

 

Saving alarm settings:

Your alarm settings are automatically saved when you complete the last setting and press the VOLUME/SELECT control.

The display will confirm with the words ‘Alarm saved’.

Waking to the alarm:

Once you have set the alarm with your required time and wake-up mode, set the radio to Standby.

If the alarm is active, the alarm symbol will show on the display -

10