Technika LCD40-920 Power Connection, Connecting the LCD TV to a PC, Connecting to a DVD Player

Power Connection

IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz.

•After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains.

•Plug the power cable to the mains socket outlet.

Connecting the LCD TV to a PC

For displaying your computer’s screen image on your LCD TV, you can connect your computer to the TV set.

•Power off both computer and display before making any connections.

•Use 15-pin D-sub display cable to connect a PC to the LCD TV.

•When the connection is made, switch to PC source. See “Input selection” section.

•Set the resolution that suits your viewing requirements. Resolution information can be found in the appendix parts.

Audio	PC Input
Inputs
PC audio cable	PC RGB cable
(not supplied)	(not supplied)
to AUDIO INPUTS	to PC input
on the TV

Connecting to a DVD Player

If you want to connect a DVD player to your LCD TV, you can use connectors of the TV set. DVD players may have different connectors. Please refer to your DVD player’s instruction book for additional information. Power off both the TV and the device before making any connections.

Note: Cables shown in the illustration are not supplied.

•If your DVD player has an HDMI socket, you can connect via HDMI. When you connect to DVD player as illustrated below, switch to HDMI source. See, “Input Selection” section.

•Most DVD players are connected through COMPONENT SOCKETS. Use a component video cable to connect video input. For enabling audio, use a component audio cable as illustrated below. When the connection is made, switch to YPbPr source. See, “Input selection” section.

•You may also connect through the SCART 1 or SCART 2. Use a SCART cable as shown below.

Note: These three methods of connection perform the same function but in different levels of quality. It is not

necessary to connect by all three methods.

	Component	Component
Scart sockets	video	audio	HDMI
	inputs	inputs
			inputs

DVD Player

REAR VIEW

Using Side AV Connectors

You can connect a range of optional equipment to your LCD TV. Possible connections are shown below. Note that cables shown in the illustration are not supplied.

•For connecting a camcorder, connect to the VIDEO IN socket and the AUDIO SOCKETS. Do not connect the camcoder to VIDEO IN socket at the same time since it can cause noise in the picture. For selecting the related source, see the section “Input selection” in the following parts.

•To listen the TV sound from headphones, connect to the HEADPHONE jack of theTV.

Headphone

Camcorder

English - 9 -

[GB]_MB35_COST_40882W-1810UK_PANEUIDTV_BRONZE2_10064946 _ 50164710..indd 9 17.02.2010 14:17:11