SETTING THE TIMER

Your system includes a timer that enables you to set times for the system to switch on and switch off automatically.

To set the timer:

•Press the TIMER button on the remote control to step through each stage in timer setting, shown in the sequence below.

•To make changes to a setting, press the or button.•Press the TIMER button to confirm each setting and move on to set the next.

When timer setting is complete, the timer can be switched on or off by pressing the TIMER button.

The Timer symbol shows on the display when the timer is activated.

SLEEP MODE

THE SLEEP FUNCTION

The Sleep function allows you to program your system to switch itself off after a set period in 10 minute steps from 90 minutes down to 10 minutes.

To activate the Sleep function:

•Press the SLEEP button. The display will show Sleep 90.

•Now press the SLEEP button repeatedly until your required sleep time appears on the display.

When sleep mode is set, the sleep symbol will appear on the display to confirm that sleep mode is set.

Sleep symbol

Your system will continue to play, then will set to Standby when the sleep time expires.

To check the Sleep time remaining:
•Press the SLEEP button during Sleep mode.

The Sleep time remaining will be shown on the display.

EQ & BASS BOOST

You can change the equalisation of the sound or boost the level of bass to suit your taste.

To select an EQ response:

•Press the EQ button on the remote control repeatedly to cycle through the EQ options optimised as shown below.

As each setting is selected, the sound EQ will change.

To select bass boost:
•Press the BASS button on the remote control to toggle bass boost on or off..

16