SELECTING A SOURCE

You can choose to play music from FM radio (TUNER), a docked iPod or a personal audio player or other source connected to the AUX input on the rear panel.

To select a source:

•Press the SOURCE button to cycle through the sources. The selected source (TUNER, iPod or Aux) will be shown on the front panel display.

NOTE:- The iPod source option will only appear for selection when an iPod is docked.

ADJUSTING THE VOLUME

To increase the volume:

•Press the VOL+ button.

To decrease the volume:

•Press the VOL- button.

While the volume is being adjusted, the display will switch to show the volume setting on a scale of 0-30.

LISTENING TO FM RADIO

To listen to FM radio:

•Switch on the power by pressing the STANDBY button.

•If FM mode is not selected, press the SOURCE button repeatedly until ‘TUNER’ appears on the display.

The tuned frequency is displayed with stereo or mono indication.

To tune to a station:

The radio is tuned from the remote control.

You can choose to tune automatically to the next station in the band, to tune manually or to scan the band for stations automatically and store those found in preset locations (auto programming).

Tuning automatically:

•Press and hold the ] or [ button to scan up or down the band.

The radio will scan the band and stop at the next station.

Tuning manually:

•Press the ] or [ button briefly to step up or down the band manually.

The radio will tune the band in 50kHz steps.

Auto programming:

•Press the SCAN button to automatically program the radio presets.

The radio will tune the band and store each station found in a preset location. This process may take a few minutes and will erase stored presets. The preset stations can then be recalled.

STEREO/MONO SELECTION

•To change between stereo and mono reception, press the /,button.

The display will show stereo or mono indication.

PRESET STATIONS

Radio presets

Your radio can store up to 20 of your favourite stations as presets for quick recall.

Station presets are stored from the remote control.

To store a preset

•Tune to the station you want to store as a preset.

•Press the MEMORY button.

The ‘MEM’ symbol will flash on the display.

•Press the } or { button to locate the preset number you want to store.

•Press the MEMORY button to store the preset.

The station will be saved and the ‘MEM’ symbol will stop flashing..

NOTE: You can choose a preset number that is already in use. The new station details will over-write the stored station.

To recall a preset

•When playing FM radio, press the }or {button to step through the preset stations.

Each preset station will tune and the frequency will be displayed.

8