DOCKING AN iPod

DOCKING YOUR iPod

To dock your iPod:

•Switch off the power.

•Open the cover over the iPod dock.

•Check that the correct iPod adaptor is fitted to the docking bay.

•Locate the iPod on the Docking Connector and press it gently home.

To remove your iPod from the dock:

•Grip the iPod at the sides.

•Lift the iPod gently from the dock.

CHARGING AN iPod

When an iPod is docked and the unit is switched on, the iPod will begin to charge automatically.

PLAYING FROM AN iPod

Once an iPod is docked, you can operate your iPod functions from the controls on the remote control.

Playback functions available from the top panel controls or remote control:

•Press the /, button to toggle between Play and Pause mode at any time.

•Press the } or { button to select the previous or next track on your iPod.

•Press and hold the }or {button to fast search forwards or backwards through a track.

Additional functions available from the remote control:

•Press the . button to stop playback

•Press the ] or [ button to fast search forwards or backwards through a track.

•Press the PLAYLIST+ or PLAYLIST- button to select the next or previous playlist.

•Press the REPEAT button to cycle through the repeat modes available on your iPod. The mode set will show on the iPod display.

iPod menu functions:

You can press MENU and the cursor buttons, MN on the remote control to navigate the iPod menus.

•To move up through the iPod menu, press MENU on the remote control.

•To scroll up and down options displayed on the iPod menu, press the MN cursor buttons.

•To select menu items, press the ENTER button on the remote control.

iPod VIDEO PLAYBACK

If you dock an iPod Video you can view the photo or video program from the iPod on a TV monitor via your radio, whilst listening to any soundtrack through the radio speakers.

NOTE: The TV must be equipped with a Composite Video (CVBS) input.

Connecting an external TV monitor:

•Connect the yellow plug of the 3-way AV cable (supplied) between the VIDEO OUT jack on the back panel of your radio and a suitable Composite video (CVBS) input of your TV. This is often located on the front or side of the TV.

NOTE:- The red and white plugs are not used for video connection.

Switching on the iPod video output:

Before viewing photo or video programs on your TV you will need to switch on the iPod video output. The iPod video output selector is generally found as follows -

•Navigate to the ‘Videos’ or ‘Photos’ menu of the iPod.

•Select ‘Settings’.

•Select ‘TV out’.

•Set ‘TV out’ to On.

The video out signal from the iPod will now be enabled.

Selecting the correct input on your TV:

•Set the TV input selector to the AV input that you used when connecting the AV cable.

You can now play the iPod and set the volume level on the radio.

Viewing photos on your TV:

•Navigate to the Photos menu of your iPod.

•Press enter to select the photo you want to see.

•Press enter again to view the photo on your TV.

10