iPod ADAPTORS

Before docking your iPod you must first check if your iPod has a docking connector. Early iPod models and iPod shuffle do not have one and cannot be docked to your unit. The docking connector is located on the base of the iPod as shown below.

Docking Connector

Before docking your iPod, you must first fit the correct iPod adaptor to the docking bay. Each iPod adaptor matches the shape of a particular iPod and is necessary to ensure that your iPod is securely held when docked.

FINDING AN ADAPTOR

iPhone adaptors

Two adaptors are supplied with your docking station. One adaptor is compatible with iPhone 1st generation, the other with iPhone 2nd/3rd generation. These may be used if you are docking an iPhone.

iPod adaptors

If you are docking an iPod, the iPod may have been supplied with a standard dock adaptor in the packaging when new.

If you don’t have a dock adaptor

If your iPod was not supplied with a standard dock adaptor, or if you have lost the adaptor, you can buy one from Apple on-line. To determine the exact model of your iPod, refer to this web-link - http://support.apple.com/kb/HT1353. You can then browse the iPod accessories page on the Apple website to find an adaptor for your iPod model that can be purchased on-line.

iPod adaptor

Docking bay
FITTING THE iPod ADAPTOR
Fit the adaptor by pressing it gently into the Docking Bay as shown above.

NOTE: Do not dock an iPod without fitting the correct adaptor, you may damage the iPod and your unit.

DOCKING AN iPod

DOCKING YOUR iPod
To dock your iPod:
•Check that the correct iPod adaptor is fitted to the docking bay.•Locate the iPod on the Docking Connector and press it gently home.
To remove your iPod from the dock:
•Grip the iPod at the sides.•Lift the iPod gently from the dock.

CHARGING AN iPod

When an iPod is docked, the iPod will begin to charge automatically.

NOTE:- The iPod will charge at all times that the unit is connected to mains power.

6