blender Ouest:-2550398 29/02/08 14:17 Page 12

• Cut all the ingredients into cubes and then place them in the blender jug (C).

• It is best to start with liquids. Do not go over the maximum level shown on the jug (1.2 l).

• You can add ingredients through the measuring cap hole while the appliance is running.

• Fit the lid (B) to the blender jug (C).

• Connect the appliance

• To start the appliance, turn the control dial (E) to position “1” or “2” OR apply a few pulses using the “PULSE” GB position.

To stop the appliance, set the control dial (E) back to “0”.

Wait for the appliance to come to a complete stop before removing the jug.

Remove the jug by unlocking it in the opposite direction to assembly (see figure3).

CAUTION: Never pour or mix liquids or food whose temperature is higher than 80°C (175°F) into the jug. When mixing hot food (which is below 80 C (175 F) , keep your hands away from the lid and the cap to avoid any risk of burns or scalds.

Cleaning

Disconnect the appliance.

Remove the jug and rinse it and its lid under running water.

Wash the jug and lid in hot water with a few drops of washing up liquid.

You can wash the blender jug and lid in the dishwasher.

Clean the body of the appliance (D) with a moist cloth. Dry thoroughly.

Never immerse the body of the appliance under water or put it under running water.

Handle blades with care. They can cause injury.

What to do if your appliance does not work?

Problems

 

Causes

 

 

Solutions

 

 

 

 

 

 

 

 

The plug is not connected.

 

 

Connect the appliance to a socket

 

 

 

 

with the same voltage.

 

 

 

 

 

Product does not work.

 

 

 

 

 

 

The jug or accessory is not fitted

 

 

Check for correct positioning of the

 

 

correctly on the body of the

 

 

jug.

 

 

appliance.

 

 

 

 

 

 

 

 

 

 

 

The product is not placed on a flat

 

 

Place the appliance on a flat

 

 

surface.

 

 

surface.

Excessive vibration.

 

The jug or accessory is not

 

 

Check for correct positioning of the

 

 

correctly fitted to the body of the

 

 

jug.

 

 

appliance.

 

 

 

 

 

 

 

 

 

 

 

Too great a volume of ingredients.

 

 

Do not go over the maximum level

 

 

 

 

indicated on the jug (1.2 litres).

Leak from lid.

 

 

 

 

 

 

 

 

 

The lid is not correctly positioned.

 

 

Check lid is correctly positioned on

 

 

 

 

 

 

 

 

jug.

 

 

 

 

 

 

 

 

 

 

 

Blade does not turn easily.

 

Pieces of food too big or too hard.

 

 

Reduce size or quantity of food. Add

 

 

 

liquid.

 

 

 

 

 

 

 

 

 

 

 

What if your appliance still does not work?

• Contact an authorised service centre (see service handbook).

12