•Do not use the blender for more than 3 minutes continuously.

•Place the blender on a flat, stable, heat-resistant, clean and dry worktop.

•Do not let long hair, scarves, ties, etc. hang over the blender jug or accessories when in operation.

•Do not use the blender outside in the open air.

•Do not remove the lid (B) before the blades have stopped completely.

•Never use this appliance for blending or mixing items other than food ingredients.

•Wait for the appliance to cool down to room temperature after each batch you process.

•Never use the blender or its accessories without ingredients and never pour boiling liquids (80C) into the jug.

•If the supply cord is damaged, it must be replaced by an approved service centre.

SAFETY LOCKING

The appliance can run only when the jug (C) or accessory (F) are correctly positioned and locked on the motor unit (D).

CAUTION: The blades are extremely sharp; handle them with caution when using, emptying or cleaning the appliance.

USING FOR THE FIRST TIME

•Before using your appliance for the first time, clean all the accessories (A, B, C and F) in warm soapy water, except for the motor unit (D).

•Make sure all the packaging has been removed before operating the appliance.

•Important note: Turn the speed selector (E) to “0” before placing the blender jug or accessories on the motor unit.

•The appliance starts only if the jug or accessory is correctly positioned and locked on its body.

•Do not operate the blender if the lid is not in place.

USING YOUR APPLIANCE

1. Mixer JUG:

•Fit the lid (B) to the mixer jug (C) and lock it by positioning it on the holes opposite the spout (figure 1).

Introduce the measuring cup (A) into the lid and press into place (figure 1). You are advised to hold the lid during operation.

•Place the mixer jug (C) on the body of the motor unit (D). The lock (open) is aligned in the slot on the motor unit (figure 1).

•Then rotate the mixer jug (C) through a turn the lock (closed) appears (figure 1).

8