Description
AMotor base
BGrinder/chopping bowl C Blade
D Lid
E Blender jug
F Blender jug lid G Measuring cap H On/Off button
I Vegetable cutter unit J Feed disc
K Vegetable cutter disc (reversible) L Vegetable cutter lid
M Vegetable cutter pusher N Juicing unit
O Filter
P Juicer lid
Q Juicer pusher
Safety instructions
-Read the user manual carefully before first using your appliance. Tefal cannot not be held responsible for any use that does not
comply with the operating nstructionsi .
-This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
-Never leave the appliance in reach of children
-Check that your appliance's power supply rating corresponds to your mains electrical supply. Any error in connection negates the guarantee.
-This product has been designed for domestic use only. Any commercial use, inappropriate use or failure to comply with the instructions, the manufacturer accepts no responsibility and the guarantee will not apply.
-Unplug the appliance as soon as you stop using it and when cleaning.
-Do not use the appliance if it does not run correctly or if it has been damaged.
-Any intervention other than cleaning or normal maintenance by the customer must be performed by a Tefal approved centre.
-Do not put the motor base (A), power supply cord or plug in water or any other liquid.
-Do not use the appliance if the power supply cord or the plug are damaged. Avoid taking risks and have them replaced by a Tefal approved centre (see
-Never use the juicer if the lid or filter are damaged. To avoid any risk of the juicer filter breaking, replace it as soon as it shows signs of wear or damage. See that is replaced every 2 years for appliance's used on a daily basis.
Using your appliance
Before first use, wash and dry the parts that will come into contact with food.
Processor chopping function
(according to model)
-Place the motor base (A) on the table.
-Do not plug in the processor yet.
-Place the grinder/chopping bowl (B) on the
motor base (A) 
and lock it into place by turning it
-Fit the blade (C) on the central axis inside the grinder/chopping jug (B).
-Handle the blade (C) with care, they are extremely sharp.
-Cut the food up into pieces before placing it in the grinder/chopping bowl (B).
-Fit the lid (D) to the grinder/chopping bowl
(B). Now you can plug the processor in.
-Press down on the lid to start the processor immediately 
.
-To stop it, release pressure on the lid and the appliance will stop at once.
-Never remove the lid until the blade (C) have come to a complete stop.
-Unplug the appliance each time after use and before any cleaning operation.
-To remove the blade (C) 
, first take the grinder/chopping bowl (B) in one hand and
press down on the blade button with your thumb.
-Now remove the blade (C) from inside the grinder/chopping bowl (B) before serving your preparation.
Hints
- Important: you will obtain a better chopping
12
