consistency by operating in pulses instead of continually.
-Press for the required time you need to get the chopped consistency you want.
-To obtain a finer consistency, use the spatula to release food that has become stuck during chopping and
-Over time, the blade (C) can become blunt and will need to be replaced.
A new blade = better performance.
-Let the appliance cool for 2 minutes before using again. Never use the appliance empty.
Recommended times:
Ingredients | Maximum | Maximum |
| Quantity | Time |
Parsley | 20 g | 6 sec |
|
|
|
Onions | 250 g | 12 sec |
|
|
|
Shallots | 150 g | 9 sec |
|
|
|
Garlic | 140 g | 10 sec |
|
|
|
Rusks | 50 g | 5 sec |
|
|
|
Almonds | 250 g | 9 sec |
|
|
|
Hazelnuts | 200 g | 12 sec |
|
|
|
Walnuts | 150 g | 10 sec |
|
|
|
Parmesan | 100 g | 10 sec |
|
|
|
Raw meat | 330 g | 6 sec |
|
|
|
-Place the blender jug (E) on the work surface and not onto the motor. All handling operations must be performed with the blender jug placed on the work surface, never fitted to the motor base (A) .
-Put the ingredients to be blended in the blender jug (E), pouring in liquids first
ollowedf by solids.
-Fit the lid (F) to the blender jug (E). Never place the blender jug (E) on the motor base
(A) without its lid firmly fitted in place (F).
-With the lid on the blender jug (E), position it on the motor base (A) and turn until it slots correctly into position 
.
-Plug in the appliance and start up by turning
the On/Off button (H) to the right to “I” 
and use it for a maximum of 30 seconds only, then let the appliance cool for 2 minutes before using again.
-To stop the appliance, move the On/Off
button (H) to the left to “0”.
- Never put your fingers or any other object in
the blender jug when the appliance is running.
-Do not operate the blender jug without its lid and measuring cap.
-Do not operate the blender jug empty.
-Wait until the appliance has come to a
complete stop before removing the blender jug from the motor (A).
CAUTION : Never pour or blend ingredients into the blender jug if their temperature is above 80°C (175°F). When blending hot ngredients,i keep your hands away from lid and cap to avoid any risk of burns.
Vegetable slicer and Juicer functions:Do not process more than 0.5 kg of fruits or vegetables per operation, and each operation should not exceed 1½ minute. You can carry out up to 3 successive operations with a minimum of 2 minutes pause between each one.
Vegetable cutting function (according to model)
-Use the vegetable cutting disc (K) to grate (face A) and slice (face B).
-With the appliance unplugged, position the vegetable cutter unit (I) on the motor base (A) and turn it until it slots into place correctly.
-Fit the feed disc (J) and then the vegetable cutter disc (K) onto the vegetable cutter unit
(I)
.
-Lock the lid (L) from left to right on the vegetable cutter unit (I) 
.
-Place a small bowl or jug under the outlet spout 
.
-Plug in the appliance.
-Switch on by moving the On/Off button (H) to the right to “I”.
-Caution: If the lid is not fitted correctly, the On/Off button (H) will not engage and the appliance will not operate (Tefal safety system). For the same reason, you cannot remove the lid while the vegetable cutter is running.
-Remove the pusher (M).
-Once the motor has started to run, gently introduce the vegetables into the funnel of the lid (L).
-Push the food in with the pusher (M) without forcing it. Do not use any other utensil for this
purpose. Above all, never push using your ingersf .
-To stop the appliance, turn the On/Off button
(H)back to the left to “0”.
13