![](/images/new-backgrounds/1330067/33006729x1.webp)
en | en |
What, if....
1- The appliance will not work, even though it is switched on.
•Check if the power cable is properly connected!
•Check if the mains supply is in order, or if a circuit breaker has been tripped!
•Check the temperature control for correct setting!
2- There is a power failure.
Your freezer is suitable for the
Do not open the door in case of a power failure.
For a rated appliance, frozen food in the freezer compartment will not be affected if the power failure lasts shorter than the “Conservation Time From Failure (hours)” mentioned in the rating label.
If the power failure is longer than the “Conservation Time From Failure (hours)”, then the food should be checked and either consumed immediately or cooked and then
3- The interior light does not work.
Check the power supply!
Check the installation of the light bulb! Unplug the power cable before checking the light bulb. (Also see the section “Replacing the interior light”)
4- There is high temperature alarm
If the actual temperature of the freezer compartment is warm then the alarm icon on the display (Fig. 2/m) lights on. The alarm icon lights off when the actual temperature of the freezer compartment cools down.
The high temperature alarm may rise up due following situations.
a)Warm food storage
b)Warm air in the freezer compartment
c)Freezer door is left open for a long time
If the high temperature alarm remains on for more than 24 hours then contact with the customer service.
The high temperature alarm is not active in 24 hours after plugging the appliance into the electricity.
5- There is error messages and alarm
Incase any failure condition due wiring connection of the appliance occurs, and then the alarm icon on the display (Fig. 2/m) starts blinking together with the relevant error message.
Incase some certain characters (E0, E3, ..etc.) appear on the display then contact with the customer service. The fuzzy control algorithm in order to preserve food takes place till the customer service arrives.
The alarm icon lights off just after the removal of the failure.
6- There is actual fridge temperature failure
The appliance performs cooling considering the fridge set temperature. The actual fridge temperature shown on the display will reach the adjusted fridge set temperature, when the packages are cold enough.
There may be some oscillations on the actual fridge temperature shown on the display due;
a)The fridge door is Opened / Closed frequently
b)Loading warm packages inside the fridge.
c)Leaving the fridge door open for a long period of time
11