Tekkeon MP3300 manual View myPower ALL Battery Capacity, Recording Device Information

View myPower ALL Battery Capacity

The capacity in myPower ALL will decrease as the battery powers and/or charges your devices.

The remaining voltage is shown on the voltage indicator, which is accessed as described below. As the voltage decreases, the lights will turn off in sequence from right to left. When the myPower ALL battery capacity is low, only the red EMPTY light will be on. You should recharge myPower ALL at this time.

When myPower ALL is completely out of battery, all lights will be off. At this point, you must charge myPower ALL.

1.With the voltage lock in the locked position (LOCK) and the adapter plug/power output cord, or the power adapter connected, press and hold the voltage selector. When you release the voltage selector, the battery capacity indicators will turn off, and one indicator will turn on to indicate the voltage selection.

CAPACITY INDICATOR

Red Indicator	1-5% (Recharge before using)
1st Green Indicator	5-15%
2nd Green Indicator	15-25%
3rd Green Indicator	25-40%
4th Green Indicator	40-55%
5th Green Indicator	55-70%
6th Green Indicator	70-85%
7th Green Indicator	85-100%

Recording Device Information

The Device At-A-Glance Card included with myPower ALL enables you to record the information you need to use myPower ALL with each of your portable devices. Simply record the device name, required voltage, and reference letter for the compatible adapter. Store the card in the pocket provided inside the leather case.

8