![](/images/new-backgrounds/1314203/31420313x1.webp)
3.Connect the adapter plug to the power output cord (but not the device), according to the device polarity:
•If the device polarity is center positive, match the positive symbol (+) on the selected adapter plug to the positive symbol (+) on the power output cord and connect.
Connecting the Plug for a Center Positive Device
• If the device polarity is center negative, match the positive symbol (+) on the selected adapter plug to negative symbol
(If the polarity is not shown, you can assume that it
is center positive, as with most devices in North America.)
Connecting the Plug for a Center Negative Device
If you change the adapter plug while the power adapter cord is connected to myPower ALL, the voltage setting will reset to 3V, the default voltage setting.
Connect the Power Output Cord
1.Plug the large end of the power output cord into the DC OUT jack on the end of myPower ALL. The 3V voltage indicator will turn on to indicate that the voltage is set to the lowest setting.
(If you have previously selected a voltage, the voltage selection will be returned to the lowest setting, 3V.)
Adjust the Voltage Level
1.Locate the voltage specification for your portable device. This can be found on the device power adapter label or device specification label which typically is found on the bottom of the unit.
(If available, use the voltage specification shown on the power adapter.)
Sample Power Adapter Label
USER GUIDE | 5 |