NEC LCD5220 Attach the cable cover, Switch on the power of all the attached external equipment

5. Attach the cable cover

[For LCD4020]

•Remove the six screws (Figure 4).

•Use six of the M4 x 10 screws (included) to attach the cable cover (Figure 5).

Figure 4

Figure 5

[For LCD5220]

•Remove the six screws (Figure 8).

•Use six of the M4 x 10 screws (included) to attach the cable cover (Figure 9).

Figure 8

Figure 9

English

[For LCD4620]

•Remove the three screws (Figure 6).

•Use six of the M4 x 10 screws (included) to attach the cable cover (Figure 7).

Figure 6

Figure 7

6.Switch on the power of all the attached external equipment

When connected with a computer, switch on the power of the computer first.

7.Operate the attached external equipment

Display the signal from the desired input source.

8. Adjust the sound*

Make volume adjustments when required.

9. Adjust the screen (See pages 24 and 25)

Make adjustments of the screen display position when necessary.

10. Adjust the image (See page 24)

Make adjustments such as brightness or contrast when required.

11. Recommended Adjustments

To reduce the risk of the “Image Persistence”, please adjust the following items based on the application being used: “SCREEN SAVER”, “SIDE BORDER COLOR” (See page 27) “DATE & TIME”, “SCHEDULE SETTINGS” (See page 25).

It is recommended that the “FAN CONTROL” setting (See page 27) be turned to ON also.

*: The product you purchased may not have this feature.

English-13