English-27
English
MONITOR ID Sets the monitor ID number from 1-26. 1
IR CONTROL Selects the mode of the monitor for use with the infra-red remote control when using the NORMAL
RS-232C daisy chain.
NORMAL The monitor will be controlled normally by wireless remote controller.
PRIMARY Choose “PRIMARY” for the first monitor within an RS-232C daisy chain.
SECONDARY Choose “SECONDARY” for all subsequent monitors within an RS-232C daisy chain.
LOCK Prevents the monitor from being controlled by wireless remote controller. To return to normal
operation, press the “DISPLAY” button on the remote controller for 5 seconds.
TILE MATRIX Allows one image to be expanded and displayed over multiple screens (up to 25) through a
distribution amplifier.
H MONITORS Number of monitors arranged horizontally. 1
V MONITORS Number of monitors arranged vertically. 1
POSITION Select which section of the tiled image to be displayed on the monitor. 1
TILE COMP Turns the TILE COMP feature on. NO
ENABLE Enables Tile Matrix. NO
POWER ON DELAY Adjusts the delay time between being in “standby” mode and entering “power on” mode. 0 Sec.
“POWER ON DELAY” can be set between 0 and 50 seconds.
POWER INDICATOR Turns ON or OFF the LED located at the front of the monitor. ON
If “OFF” is selected, LED will not light when the LCD monitor is in active mode.
MULTI DISPLAY RESET Resets the following settings within the MULTI DISPLAY menu back to factory setting: -
MONITOR ID, IR CONTROL, TILE MATRIX, POWER ON DELAY.
POWER SAVE Sets how long the monitor waits to go into power save mode after a lost signal. ON
All inputs except for TV Note: When connecting DVI, video card might not stop sending digital data even if image has
disappeared. In this case the monitor does not get to power management mode.
STANDBY MODE Lowers power consumption. STANDBY
Note: RS-232C Function is lost when in Eco Standby mode.
HEAT STATUS Displays status of the COOLING FAN, BRIGHTNESS and TEMPERATURE. -
FAN CONTROL Cooling fan reduces the temperature of the display. AUTO
SCREEN SAVER Use the SCREEN SAVER function to reduce the risk of Image Persistence.
GAMMA The display gamma is changed and fixed when “ON” is selected. OFF
BRIGHTNESS The brightness is decreased when “ON” is selected. OFF
MOTION The screen image is slightly expanded and moves in 4 directions (UP, DOWN, RIGHT, LEFT) OFF
at user determined intervals.
SIDE BORDER COLOR Adjusts the color of the side borders when a 4:3 image is displayed. 15
Press + button, the bar will become lighter.
Press - button, the bar will become darker.
AUTO BRIGHTNESS Adjusts the brightness level according to the input signal. OFF
DVI, VGA, RGB/HV inputs only
CHANGE SECURITY Allows the security password to be changed. -
PASSWORD The factory preset password is 0000.
SECURITY LOCK Locks the security password. OFF
DDC/CI ENABLE/DISABLE: Turns On or OFF the two way communication and control of the monitor. ENABLE
DISPLAY PROTECTION Resets the following settings within the DISPLAY PROTECTION menu back to factory setting: -
RESET POWER SAVE, FAN CONTROL, SCREEN SAVER, SIDE BORDER COLOR, AUTO
BRIGHTNESS.
*: The product you purchased may not have this feature.
MULTI DISPLAY DISPLAY PROTECTION