6 Place paper in the drawer.
yThe maximum number of sheets can be placed in one go is 250 (80 g/m2). Be sure that the stack height of paper is not higher than the line indicated at the inner side of the guide.
P.31 “Acceptable media types”
yFan the paper well before placing it in the drawer, otherwise multiple feeding could occur.
yPlace the paper face up. You may tell its “face” by the note on its wrapping paper.
7 Adjust the side guides to the desired paper size.
Be sure that a gap of approx. 0.5 mm (less than 1.0 mm in total) is left between the paper and each side guide (shown as “A” in the picture). If the gap is inappropriate, this could cause a paper misfeed.
A |
Preparation 2 - Placing Copy Paper 35
