In this section, the registration procedure is described with LT size paper placed on the bypass tray as an example.

1 Press and hold the [COPY] and [DRAWER] buttons simultaneously for more than two seconds.

“Fnc” appears on the LED display.

2 Press the [DRAWER] button several times until the lamp of the bypass tray is lit.

3 Press the [COPY] button several times until the [OTHER] lamp is lit. “Fxx” appears in the LED display. (Two digits come at “xx”.)

Using Bypass Tray 53

Page 55
Image 55
Toshiba e-STUDIO206, e-STUDIO166 manual Using Bypass Tray