Toshiba e-STUDIO206 manual Features of e-STUDIO166/206, Functions extended by various options

Features of e-STUDIO166/206

The e-STUDIO166/206 is a space-saving, black-and-white copier. The copying speed of the e-STUDIO166 is 16 copies per minute*1 and that of the e-STUDIO206 is 20 copies per minute*1. Both of them can be a printer when they are connected to your PC with a USB cable.*2

Lightweight and space-saving equipment with more emphasis on basic functions

yThe receiving tray is relocated to the equipment’s inner side, occupying as little space as possible.

yIts weight has been trimmed to approx. 33.7 kg.*3

yOperability of the control panel has been upgraded with larger buttons.

yA wide range of paper sizes from A3 to A5-R are acceptable.

yCopy images can be zoomed out or in between 25% and 200%.

yThe automatic copy density mode is adopted to detect the density of the original and auto- matically adjust it to the most suitable one for the copy image.

yThe bypass tray equipped as a standard unit makes copying on various media types such as overhead transparencies possible.

yScanning data with a TWAIN driver is enabled as a standard function.

Functions extended by various options

yThe Automatic Document Feeder (ADF) dramatically saves time when you need to copy massive amounts of originals.

yThe Paper Feed Unit (PFU) adds one more drawer.

yElectronic sorting*4 is realized with the Expansion Memory.

Ecological energy-saving design

yThe toner recycling system in which used toner is recovered and reused is adopted.

yIts warm-up time has become be approx. 25 seconds.*5

yThe low power mode, which reduces unnecessary electric power by having the fuser unit temperature lowered while the equipment is left inactive, is adopted.

yThe sleep mode, which maintains the smallest possible power consumption during the equipment’s inactive period after it has not been used within a specified period of time, is adopted.

*1 These speeds are realized in the non-sort mode, when A4 originals placed in a portrait direction are con- tinuously copied and the Automatic Document Feeder (optional) is not used.

*2 When this equipment is used as a printer, the co-packed software needs to be installed into your PC.

*3 This is the weight of the equipment itself (without any options).

*4 Electronic sorting is a function to have the copies exit and be sorted into the same page order as that of the originals in each set.

*5 This is the value when the room temperature is 20 °C or more at rated power input.

Features of e-STUDIO166/206 13