1PREPARATION
17.[DRAWER] button/lamps
Use this button to select a drawer or the bypass tray to be used as a paper source. The lamp of the paper source currently selected is lit. The lamp blinks when the selected drawer or tray is running out of paper.
When paper in the drawer or on the bypass tray has run out, see the following page to add paper:
P.31 “Preparation 2 - Placing Copy Paper”
18.Original setting lamp
The lamp is lit when originals are placed on the Automatic Document Feeder (optional). This lamp blinks in the following situations:
-When the original needs to be placed on the original glass (When the [START] button is pressed without the original cover being opened after copies are made)
-When the originals need to be placed on the Automatic Document Feeder (optional) (When a paper jam in the Automatic Document Feeder is released)
-When the Automatic Document Feeder (optional) on which the originals are placed is raised.
19.[COPY] button/lamps
Use this button to select the size of paper to be used. The lamp of the paper size currently selected blinks when this size of paper is not placed in the drawer or on the bypass tray. See the following page for details:
P.62 “Manual paper selection”
20.[ORIGINAL] button/lamps
Use this button to specify the size of an original.
P.66 “Specifying both the sizes of the original and the copy paper”
21.APS/AMS selecting button/lamps
Automatic paper selection (APS): The equipment detects the size of original and automati- cally selects the same size of copy paper.
P.61 “Paper Selection”
Automatic magnification selection (AMS): Set the size of copy paper to be used in advance. The equipment then detects the size of original and automatically selects the most suitable reproduction ratio to the copy paper.
P.64 “Automatic magnification selection (AMS)”
APS and AMS are available only when originals are placed on the Automatic Document Feeder (optional,
