Continuous copying speed | Toshiba e-STUDIO206, e-STUDIO166 guide

Continuous copying speed

			sheets/min.

Paper size	Feeder	e-STUDIO166	e-STUDIO206

A4, A5-R1, B5, LT, ST-R1	Drawer	16	20
	Bypass tray	16	20

A4-R, B5-R, LT-R	Drawer	15.5	15.5

	Bypass tray	15.5	15.5

B4, FOLIO, LG, COMP, 13"LG	Drawer	13	13

	Bypass tray	13	13

A3, LD	Drawer	11	11

	Bypass tray	11	11

*1 A5-R and ST-R can be placed only on the bypass tray.

yThe values above are measured when originals are set on the original glass, 100% and non- sort multiple copies are made.

yTOSHIBA-recommended paper is used for the values of the specifications above.

yThe bypass copying speed is as listed above when specifying the paper size.

yThis specification varies depending on the copying conditions and the environment.

e-STUDIO166/206 Specifications 107

Image 109

Toshiba e-STUDIO206, e-STUDIO166 manual Continuous copying speed, Paper size Feeder STUDIO166 STUDIO206

Contents

Operators Manual for Copying Functions Page Preface Preface Working environment For Germany onlyPage Lineup of our manuals Before Reading This Manual Description of original/paper direction How to read this manual Signal in this manual Trademarks Contents 100 Copying in Same Page Order as Originals Sort Copying 111 Cleaning charger 101 Cleaning transfer charger 102 Contents Recommended toner cartridges Toshiba Quality Is Second to NoneCartridge detecting function Toner remaining check function Toner Supplies / PartsGeneral Functions extended by various options Features of e-STUDIO166/206Ecological energy-saving design When installing or moving General Precautions 10 cm 80 cm Other points When using the equipment Position of Certification label, etc When handling supplies During maintenance or inspection Poration Disclaimer Notice Energy Star programme Environmental Information Description of Each Component Preparation 1 Turning Power onPreparation 2 Placing Copy Paper Front / Right side Description of Each ComponentPlaten Cover Automatic Document Feeder optional, MR-2017 Left side / Inner side Receiving tray Scanning area USB terminal 4-pinOriginal scale Platen sheet Configuration of options Control panel Density adjustment buttons/lamps Original mode button/lampsLED display Copy qty. / zoom display selecting button/lamp Drawer button/lamps Original setting lampCopy button/lamps Original button/lamps Turning power on Preparation 1 Turning Power onTurning power OFF To turn the equipment into the energy saving mode manually Saving energy when not in use Energy saving modeCancelling the energy saving mode Acceptable media types Preparation 2 Placing Copy PaperFeeder Media type Paper size Maximum sheet Capacity *1 Paper types not acceptable Recommended paperStoring paper Media type Product name Press down the paper plate Placing paper in drawers Widen the gap with both hands Place paper in the drawer Adjust the side guides to the desired paper size Register the paper size into the equipment Do not let your fingers be caught when closing the drawer Registering standard size A3, A4, A4-R, A5-R, B4 Preparation 3 Registering Size of Paper Placed Code No Registering other standard sizes Preparation 3 Registering Size of Paper Placed Press the Start button Placing Originals Using Bypass TrayMaking Copies Setting position Type of origi When the built-in memory has become full during scanningPlacing Originals Acceptable originals Placing originals on the original glass Placing booklet-type originals such as books or catalogues Precautions for Automatic Document Feeder optional Using Automatic Document Feeder optionalWhen black streaks appear on the copied image Media types Maximum size Maximum number Paper weight Placing originals on Automatic Document Feeder optional When placing a large amount of originals with a long width Check if paper is placed in the drawer Making CopiesPlace the original Select the copy modes as required When the paper has run out When the number of sheets exiting has exceededStopping/Resuming copying Press the CLEAR/STOP button during scanning or copying Press the Interrupt button Interrupting copying and making another copy Interrupt copy Media type Paper size Maximum sheet Capacity *1 Using Bypass Tray Preparation Registering paper size placed on bypass tray ST-R Folio Comp Using Bypass Tray Press the Start button Bypass copying on standard size paper Placed on the bypass tray is lit Using Bypass Tray Page Zooming In/Out Copy Image Default Settings Paper SelectionAutomatic paper selection APS Manual paper selection Contents Default setting at installation Default Settings Automatic paper selection APS Paper SelectionPlace the original on the Automatic Document Feeder Automatic paper selection APS Place paper in the drawer Place the original Manual paper selection Selecting the drawer of the equipment Automatic magnification selection AMS Zooming In/Out Copy ImageAutomatic magnification selection AMS Specifying reproduction ratio manually If the Function Clear lamp is blinking and copying stops Specifying both the sizes of the original and the copy paper Press Zooming out or Specifying reproduction ratio manuallyDesired reproduction ratio appears Zooming in button until Zooming In/Out Copy Image Copying in Same Page Order as Originals Sort Copying Selecting Image Mode To adjust the density to the desired level Adjusting Density LevelTo return it to the automatic copy density mode DarkPage Settings and Management of Equipment All lamps on Sound on All lamps off Sound off Switching Operation Sound On/Off Checking Total Number Copied Switch the display to check the rest of the total numberPress Button for more than two seconds Page When Message Lamp is Lit/Blinking Paper Jams Troubleshooting Cover open lamp When Message Lamp is Lit/BlinkingPaper empty lamp Toner lamp Recommended toner cartridges Paper jam lamp Service call lamp Paper Jams When paper jams occur frequentlyChecking position of paper jams Paper jams within Automatic Document Feeder optional When releasing jammed paperRaise the lever, and then open the upper cover Do not tear jammed paper Paper Jams Pull out the paper jammed on the bypass tray Paper jams on bypass tray Paper jam behind transfer unit Close the transfer unit and the side cover Paper jams within fuser unit Paper Jams Paper jams within Paper Feed Unit optional Open the front cover Replacing Toner CartridgeHold down the green lever Pull out the toner cartridge Clean the charger Replacing Toner Cartridge With the transfer charger wire General operation Before Calling Service TechnicianPhenomenon Usual cause Countermeasure Original/Copy paper-related items Toner-related items Image trouble Tion Charger is dirty Clean the charger Page Daily Inspection 100 Maintenance and Inspection Original glass Guides Platen sheet Daily Inspection Open the front cover Clean the charger Cleaning charger Cleaning transfer charger Daily Inspection Page Specifications and Options OPC STUDIO166/206 Specifications Paper size Feeder STUDIO166 STUDIO206 Continuous copying speed Automatic Document Feeder Specifications of OptionsPaper Feed Unit Packing List Page Index 106 DP-1660/2060 OME06015700 Multifunctional Digital Systems