Image trouble | Toshiba e-STUDIO166, e-STUDIO206 specs

5 TROUBLESHOOTING

Image trouble

	Phenomenon		Usual cause	Countermeasure
The density of the copy			Toner has run out.	The toner lamp blinks when toner has run
image is light.				out. Replace the toner cartridge if it is
				blinking.
				P.89 “Replacing Toner Cartridge”
			The copy density is set	Make the density darker if you use the
			lighter.	manual copy density mode. Or use the
				automatic copy density mode.
			The transfer charger wire is	Clean the transfer charger wire.
			dirty.	P.102 “Cleaning transfer charger”
The density of the copy			The copy density is set	Make the density lighter if you use the
image is dark.			darker.	manual copy density mode. Or use the
				automatic copy density mode.
The copied image is stained.			The Automatic Document	Lower them fully to block outside light.
			Feeder (optional) or the
			Platen Cover is not lowered
			fully.
			The original glass, platen	Clean them.
			sheet, scanning area or	P.100 “Daily Inspection”
			guides are dirty.
			The copy density is set	Make the density lighter if you use the
			darker.	manual copy density mode. Or use the
				automatic copy density mode.
			Highly transparent originals	Place a blank sheet of paper, the same
			such as OHP films or tracing	size as the original or larger, over the orig-
			paper are used.	inal.
The copy image is fogged.			There is a slight gap	Lower the Platen Cover or the Automatic
			between the original glass	Document Feeder (optional) fully so that
			and the original.	the original will contact with the original
				glass.

			The copy paper is damp.	Replace with dry copy paper.


The density level of the copy			The transfer charger wire is	Clean the transfer charger wire.
image is uneven in a horizon-			dirty.	P.102 “Cleaning transfer charger”
tal direction.



The copy image is partially			The size or direction of the	Use copy paper of the same size as the
missing.			copy paper and the original,	original or set the reproduction ratio suit-
			or the reproduction ratio is	able to the copy paper size.
			not set properly.

96 Before Calling Service Technician

Image 98

Toshiba e-STUDIO166, e-STUDIO206 manual Image trouble

Contents

Operators Manual for Copying Functions Page Preface Preface For Germany only Working environmentPage Before Reading This Manual Lineup of our manuals How to read this manual Signal in this manual Description of original/paper direction Trademarks Contents Copying in Same Page Order as Originals Sort Copying 100 Cleaning charger 101 Cleaning transfer charger 102 111 Contents Cartridge detecting function Toshiba Quality Is Second to NoneRecommended toner cartridges Toner remaining check function General Supplies / PartsToner Ecological energy-saving design Features of e-STUDIO166/206Functions extended by various options General Precautions When installing or moving Other points 10 cm 80 cm When using the equipment Position of Certification label, etc During maintenance or inspection When handling supplies Disclaimer Notice Poration Environmental Information Energy Star programme Preparation 2 Placing Copy Paper Preparation 1 Turning Power onDescription of Each Component Platen Cover Description of Each ComponentFront / Right side Automatic Document Feeder optional, MR-2017 Left side / Inner side Original scale USB terminal 4-pinReceiving tray Scanning area Platen sheet Configuration of options Control panel LED display Original mode button/lampsDensity adjustment buttons/lamps Copy qty. / zoom display selecting button/lamp Copy button/lamps Original setting lampDrawer button/lamps Original button/lamps Turning power OFF Preparation 1 Turning Power onTurning power on Cancelling the energy saving mode Saving energy when not in use Energy saving modeTo turn the equipment into the energy saving mode manually Feeder Media type Paper size Maximum sheet Capacity *1 Preparation 2 Placing Copy PaperAcceptable media types Storing paper Recommended paperPaper types not acceptable Media type Product name Placing paper in drawers Press down the paper plate Widen the gap with both hands Adjust the side guides to the desired paper size Place paper in the drawer Do not let your fingers be caught when closing the drawer Register the paper size into the equipment Preparation 3 Registering Size of Paper Placed Registering standard size A3, A4, A4-R, A5-R, B4 Registering other standard sizes Code No Preparation 3 Registering Size of Paper Placed Press the Start button Making Copies Using Bypass TrayPlacing Originals Placing Originals When the built-in memory has become full during scanningSetting position Type of origi Acceptable originals Placing originals on the original glass Placing booklet-type originals such as books or catalogues When black streaks appear on the copied image Using Automatic Document Feeder optionalPrecautions for Automatic Document Feeder optional Media types Maximum size Maximum number Paper weight When placing a large amount of originals with a long width Placing originals on Automatic Document Feeder optional Place the original Making CopiesCheck if paper is placed in the drawer Select the copy modes as required Stopping/Resuming copying When the number of sheets exiting has exceededWhen the paper has run out Press the CLEAR/STOP button during scanning or copying Interrupting copying and making another copy Interrupt copy Press the Interrupt button Using Bypass Tray Media type Paper size Maximum sheet Capacity *1 Preparation Registering paper size placed on bypass tray ST-R Folio Comp Using Bypass Tray Press the Start button Bypass copying on standard size paper Placed on the bypass tray is lit Using Bypass Tray Page Automatic paper selection APS Manual paper selection Default Settings Paper SelectionZooming In/Out Copy Image Default Settings Contents Default setting at installation Place the original on the Automatic Document Feeder Paper SelectionAutomatic paper selection APS Automatic paper selection APS Manual paper selection Place paper in the drawer Place the original Selecting the drawer of the equipment Automatic magnification selection AMS Zooming In/Out Copy ImageAutomatic magnification selection AMS Specifying reproduction ratio manually If the Function Clear lamp is blinking and copying stops Specifying both the sizes of the original and the copy paper Desired reproduction ratio appears Specifying reproduction ratio manuallyPress Zooming out or Zooming in button until Zooming In/Out Copy Image Copying in Same Page Order as Originals Sort Copying Selecting Image Mode To return it to the automatic copy density mode Adjusting Density LevelTo adjust the density to the desired level DarkPage Settings and Management of Equipment Switching Operation Sound On/Off All lamps on Sound on All lamps off Sound off Press Button for more than two seconds Switch the display to check the rest of the total numberChecking Total Number Copied Page Troubleshooting When Message Lamp is Lit/Blinking Paper Jams Paper empty lamp When Message Lamp is Lit/BlinkingCover open lamp Toner lamp Recommended toner cartridges Service call lamp Paper jam lamp Checking position of paper jams When paper jams occur frequentlyPaper Jams Raise the lever, and then open the upper cover When releasing jammed paperPaper jams within Automatic Document Feeder optional Do not tear jammed paper Paper Jams Paper jams on bypass tray Pull out the paper jammed on the bypass tray Paper jam behind transfer unit Paper jams within fuser unit Close the transfer unit and the side cover Paper Jams Paper jams within Paper Feed Unit optional Hold down the green lever Replacing Toner CartridgeOpen the front cover Pull out the toner cartridge Clean the charger Replacing Toner Cartridge With the transfer charger wire Phenomenon Usual cause Countermeasure Before Calling Service TechnicianGeneral operation Toner-related items Original/Copy paper-related items Image trouble Tion Charger is dirty Clean the charger Page Maintenance and Inspection Daily Inspection 100 Daily Inspection Original glass Guides Platen sheet Cleaning charger Open the front cover Clean the charger Cleaning transfer charger Daily Inspection Page Specifications and Options STUDIO166/206 Specifications OPC Continuous copying speed Paper size Feeder STUDIO166 STUDIO206 Paper Feed Unit Specifications of OptionsAutomatic Document Feeder Packing List Page Index 106 DP-1660/2060 OME06015700 Multifunctional Digital Systems