
Software Setup
For a particular studio session, three Kaleidoscope channels could be acquired from the pool in the order D, E, A, which would be logical channels 1, 2, 3. This mapping information is passed from the DPM to the switcher via the control connection. Switcher output routing ensures that the logical channels 1, 2, 3 appear to the user on logical aux buses 1, 2, 3 and switcher input routing ensures that DPM logical channels 1, 2, 3 appear on the crosspoints configured for these logical channels. For the above configuration, the selection of CHANNEL ROUTING in the DPM Setup Menu should be set to BOTH.Figure 2-3. Example of Connections for a Pooled DPMKaleidoscope
Logical Channels
Effects Send Capable Video
Non-Effects Send Video
Kaleidoscope
Channel Pool
Switcher
Output
Routing
Phys Aux 2
Phys Aux 1
Phys Aux 3
Phys Aux 4
Phys Aux 5
Switcher
Input
Routing
Kaleidoscope
Physical
Channels
Logical Aux 1
Logical Aux 7
Logical Aux 4
Logical Aux 6
Logical Aux 5
Logical Aux 3
Logical Aux 2
A
C
E
B
D
Model 4000
Logical
Channel
2
Logical
Channel
5
Logical
Channel
4
Logical
Channel
3
Logical
Channel
1
0347-02-29
EDCBA