2-26

Section 2 — Startup & Configuration
Configuring Outputs

The signal formats of the Model 3000 output modules for your

installation are set up from the Outputs Menu.

1. Press the CONFG button on the main menu subpanel.

2. From the Configuration Menu, select OUTPUTS> to display

the Outputs Menu.

3. Select the output to change from the default setting by

pressing the OUTPUT SELECT button.

4. Set the characteristics of the selected output, as follows:

SUPERBLACK — Turns the superblack output ON or OFF. (The

Superblack output level is set in the System Parameters Menu,

as described previously.)

Refer to the Super Black Application Note in the Appendices

section of this manual for information on using Super Black.

SETUP ON KEY — Selects or deselects setup on the key output

signal.

OUTPUTS MENU

ON ON
config / outputs
CHROMA CLIP
= 105 %
LUM CLIP
= 105 IRE
ON
COMPOSITE CLIP
= 138 IRE
SHAPED
PGM
M/E 1 PGM
M/E 2 PGM
M/E 3 PGM
AUX BUS 1
AUX BUS 2
AUX BUS 3
AUX BUS 4
AUX BUS 5
AUX BUS 6
AUX BUS 7
FRAMESTORE
ON
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
-
-
-
-
-
-
-
-
-
-
-
-
-
-
SHAPED
SHAPED
SHAPED
UNSHAPED
-
-
-
-
BLACK CLIP
= -20 IRE
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
UNSHAPED
OFF OFF
OFF
PGM OFF ONSHAPEDOFF
SUPER
BLACK
OUTPUT
SELECT SETUP
ON KEY VIDEO/KEY
FMT OUTPUT
TIMING >LIMITER DIGITAL
RES >