
2-31
Configuring Outputs
2. Use the GROUP SELECT and CARD SELECT buttons to select
the appropriate outputs.
Note that as the output boards are selected with CARD
SELECT, the names of the outputs change above the soft
buttons.
3. Set the resolution to either 8-BIT or 10-BIT for each of the four
selected digital outputs.
4. Repeat steps 2 and 3 until all digital outputs have been
configured.
NOTE:
Dithering of the 8-bit outputs is selectable in the Misc/Signal
Process Menu.
5. Press the main menu CONFG button to return to the
Configuration Menu.