2-45

Configuring External Interfaces
NOTE:

All aux buses assigned to a DPM must be in consecutive order.

4. For a DPM-700, set the NUMBER OF CHANNELS and

CHANNEL 1 = soft knobs as appropriate for your installation.
NOTE:

Assigning an Aux Bus to a DPM level saves the parameters

under the DPM level, rather than the MISC level for E-MEM

operations.

5. Press the EXIT button to return to the DPM Setup Menu.
Mapping DPM Inputs

Set up the DPM video and key return input numbers as follows:

1. From the DPM Setup Menu, press DPM MAP INPUTS> to bring

up the DPM Map Inputs Menu.

DEVICE 1

DPM MAP INPUTS MENU

CHANNEL
SELECT
DPM
SELECT
CHAN 2
CHAN 1
CHAN 3
CHAN 4
CHAN 5
CHAN 6
CHAN 7
SECONDARY
DEVICE 2
DEVICE 3
DEVICE 4
VIDEO INPUT
= 19
KEY INPUT
= 42
DEVICE 1
(DEVOUS)
CHAN 2
VIDEO INPUT
LOGICALPHYSICAL KEY INPUT
–
29
–
–
–
–
–
–
63
–
–
–
–
–
19 42
config/extern if/dpm setup/dpm map inputs
V5.3