2-44

Section 2 — Startup & Configuration
NOTE:

Increasing the EFF SEND DELAY any further will not change

the Effects Send appearance. It will, however, delay the entry into Effects

Send unnecessarily.

Mapping DPM Aux Buses

Set up the aux bus-to-device assignment as follows:

1. From the DPM Setup Menu, press DPM MAP AUX BUSES> to

access the DPM Map Aux Buses Menu.

2. Press the DEVICE SELECT button to select the desired DEVICE

(1 through 4).

3. For Kaleidoscope, rotate the NUMBER OF CHANNELS knob to

assign Aux Buses 1 through n to this DPM number. Turn the

FIRST CHANNEL knob to assign the first aux bus to the first

physical channel of the DPM.

DPM MAP AUX BUSES MENU

DEVICE
SELECT
DPM 1
AUX 5
CHAN A
-
-
-
AUX 6
CHAN B
-
-
-
MISC
PHYS CHAN
DPM 2
DPM 3
DPM 4
NUMBER OF CHANNELS
= 4
FIRST CHANNEL
= CHAN E
-
CHAN D
-
-
-
-
CHAN F
-
-
-
-
CHAN G
-
-
-
-
CHAN H
-
-
-
-
CHAN E
-
-
-
AUX 7
CHAN C
-
-
-
config / extern if / dpm setup / dpm map aux buses
DPM 1 - - - - AUX3 AUX 4AUX 2AUX 1
Connection of physical AUX buses
to physical channels