3-14
Section 3 — Menu Descriptions
NOTE:
In a later Switcher software release, Independent and Master
Timeline runs will be controlled by a menu selection.
Effects Dissolve
■Effects Dissolve ON — Switcher learns that Effects Dissolve is
on into the Master E-MEM register
■Effects Dissolve OFF — Dissolve is not learned into Master
E-MEM register
Recall A Register
We will look at how the Recall operation works with Auto Run,
Auto Recall, and Effects Dissolve in the Normal mode.
Auto Recall
■Auto Recall ON — Switcher recalls learned enables before
recalling the effect
■Auto Recall OFF — Switcher does not recall the learned
enables. The Switcher recalls only what is currently enabled
on the Control Panel
Auto Run
■Auto Run ON — After the effect is recalled it runs (if the effect
has multiple keyframes stored)
■Auto Run OFF — After the effect is recalled it waits at the first
keyframe
Effects Dissolve
■Effects Dissolve ON (or ON when Learned) — Switcher
applies a dissolve from the Switcher’s current state (or
register) to the register being recalled
■Effects Dissolve OFF (and OFF when Learned) — Switcher
does nothing