2-6
Section 2 — Control Panel Descriptions
Keyer (M/E) or
Downstream Keyer MATTE FILL Matte (same M/E or
DSK) Lights K1 FILL or K2
FILL indicator on
Matte subpanel,
depending on Keyer
or DSK subpanel
delegation
Downstream Keyer DSK 1 or DSK 2 DSK Bus
Mask INH MASK must be on
INH MASK Mask INH MASK button
must be turned on by
the press
Matte (M/E or DSK) PRI WIPE WASH or
SEC WIPE WASH Wipe1 2
Matte If Wipe BORD is on
E-MEM Register Recall Keyer and Key Bus
Mask PRI WIPE or SEC
WIPE Wipe
Wipe BORD Matte (same M/E) BORD button must be
turned on by the
press
Lights PRI WIPE or
SEC WIPE indicator
on Matte subpanel
1. On an M/E Matte subpanel: Pressing the PRI WIPE WASH button causes the Wipe subpanel to be
auto delegated to the primary wipe pattern generator for the calling M/E. Pressing the SEC WIPE
WASH button on the M/E Matte subpanel causes the Wipe subpanel to be auto delegated to the sec-
ondary wipe pattern generator for the calling M/E.
2. On the DSK Matte subpanel: Pressing the SEC WIPE WASH button causes the Wipe subpanel to
be auto delegated to the secondary wipe pattern generator for M/E 1.
Table 2-1. Subpanel Delegation - (continued)Subpanel Button Pressed Delegated Subpanel Conditions and Comments