Appendix A: Interfaces
K1297-G20 Monitor User Manual A-25
The following interfaces are located on the front panel of the AP-4 /
AP-4/256 board:
HSerial interface
H10BaseT / 100BaseTX
The SERIAL interface (RJ45 connector) can be used as asynchronous
serial debug port for service purposes.
1
Table A14: Pin assignment for the SERIAL interface (DTE)
Pin Assignment Pin Assignment
1DCD 5RxD
2RTS 6 Ground
3 Ground 7 CTS
4 TxD 8 DTR