Operating Basics
SDA 601 Serial Digital Analyzer User Manual 25
4. Press Enter to select the new option.
5. Press any rectangular key to exit the I/O menu.
Presets
The configuration of the SDA 601 at any given time may be saved as
a Preset for later recall. Three different configurations can be saved.
Using presets, you can easily change between completely different
combinations of (for instance) Watch conditions, alarm settings,
LCD display options, and AUX output options. To save a Preset:
1. Enter the Presets menu (press Shift, then Display Select).
2. Press B once to reach the Save Preset item.
3. Choose a preset storage location (1, 2, or 3) with the A / " keys.
Remember that previous contents of the storage location will be
overwritten in the next step.
4. Press Enter to save the current settings in the indicated location.
“Working... Done” will appear on the LCD during the save pro-
cess.
5. Press any rectangular key to exit the Presets menu.
To recall a previously saved Preset:
1. Enter the Presets menu.
2. Choose the Preset (1, 2, or 3) with the A / " keys.
3. Press Enter to recall the saved configuration. “Working... Done”
will appear on the LCD. Some settings (I/O and Display settings,
for example) will change instantly; Watch and Alarm settings
will be restored in the next Watch session.
4. Press any rectangular key to exit the Presets menu.
NOTE. Recalling a preset will turn Watch mode off.
Software Reset
To reset the instrument NVRAM and restore the SDA601 to “facto-
ry” default settings, select the Factory Reset item in the Utility/Diag-
nostics/NVRAM/TIC Dgs submenu. See page 34.
NOTE. All user settings and presets will be lost.