
WFM 90 and WFM 91 Service Manual 1–1
SpecificationsThis section includes the following information:
HProduct description
HCharacteristics tables
Refer to Performance Requirements on page 1–5 for the conditions over which
the characteristics listed in this section are valid.
Product Description
The Tektronix WFM90 or WFM 91 Handheld Waveform, Vector, Picture, and
Audio Monitor is a self-contained, rasterizing television monitor. The instrument
has a built-in LCD color display device and is powered by batteries or by an AC
adapter producing 12 VDC.
This product can be used in traditional in-house applications of television
production, post-production, and signal transmission. The portability of this
instrument allows it to be used in untraditional applications, such as field
production and system maintenance.
The following is a list of the key features of this instrument:
HRasterized waveforms and graticules shown on the built-in color, four-inch
diagonal, TFT LCD display with viewing angle adjustment
HPowered by batteries or an AC adapter
HMenu-assisted monitoring operation
HVideo and audio signal input and output capability
HWaveform, Vector, Picture, Audio, and Waveform-in-Picture (WIP) display
modes
HLine Select mode for the selection of any single line of video for display
HTime-out mode to shut off power to the display backlight and/or the
instrument when the instrument is not in use
HSignal level alarm mode for the waveform and audio displays
HPreset menu to store or recall the front panel and menu setup
HInstrument readjustment is performed entirely from the front panel