EDIT Menu
Expanding a Sequence File into a Waveform File
Figure 3 $5: Menu Displayed When Lock is Selected
3.Select Delete from the bottom menu. Check to make sure that the words ªFile locked.º is displayed in the message area to indicate that it is not possible to delete the file.
4.If you press the Lock bottom menu button again, the file is unlocked and Off in the Lock label is displayed inverted. Files on a floppy disk or in NVRam can be locked/unlocked in the same manner with the UTILITY menu.
The ªExpand SEQ into WFMº item is displayed when a sequence file has been selected from the file list in the initial menu. It is used to expand a waveform created from a sequence file (.SEQ) into a waveform file (.WFM).
1.Select More from the side menu in the initial menu to display the second page of the side menu.
2.Using the general purpose knob, select a sequence file (the file name should end in .SEQ) from the file list in the initial menu. The ªExpand SEQ into WFMº item will appear in the side menu.
3 | $12 | AWG2021 User Manual |