EDIT Menu
Figure 3 #21: Adding Noise to the Sine Wave
NOTE. Portions of the waveform that protrude outside the editing area when the other waveform is added will be clipped.
Procedure 3: Multiplying Waveforms. In this example, you will multiply the sine wave you created in Procedure 1 by another sine wave with a different frequency. The procedure starts from where you left off in Procedure 2.
1.Select Undo from the bottom menu. This will eliminate the noise waveform added in Step 2.
2.Select Type from the side menu. Turn the general purpose knob or press the Type button in the side menu and select Mul Sine.
3.Select Cycle from the side menu. Using the numeric keys or the general purpose knob, set the number of cycles for the sine wave to 30.
3 #40 | AWG2021 User Manual |