EDIT Menu

Starting point

Endpoint

Editing area

Figure 3 ￿23: Defining the Editing Area

Subsequent editing operations will be performed in the area that you have set between the left and right vertical bar cursors.

The following section will describe each of the items in the side menu in detail.

Cutting Waveforms. Cut is used to remove a portion of the waveform from the editing area. The following diagram shows the menu configuration.

Operation ￿More 1 of 3￿

 

Cut

 

 

 

 

Move the right and left vertical bar cursors to define the area you wish to cut and then select Cut from the side menu. There is no sub-menu for this command; when it is selected, the section of the waveform that you have defined is cut instantly. Marker signals associated with that waveform data are also cut. Removing part of a waveform will naturally reduce the number of points in that waveform.

AWG2021 User Manual

3 ￿43